HP MSA 2040 CLI Reference Guide

hosts 421
hosts
This basetype is used by show hosts.
Table 38 hosts properties
Name Type Description
host-id string FC or SAS host port WWN, or iSCSI host initiator node name (typically the
IQN).
host-name string User-defined name of the host port, or blank.
host-discovered string • Yes: The host was discovered and its entry was automatically created.
• No: The host entry was manually created.
host-mapped string • Yes: At least one volume is explicitly mapped to the host.
• No: No volumes are explicitly mapped to the host.
host-profile string • Standard: Default profile.
• HP-UX: The host uses Flat Space Addressing.
host-bus-type string • If the host was discovered and its entry was automatically created, its host
interface type: FC; iSCSI; SAS.
• If the host entry was manually created: Undefined.
host-port-bits-
a
uint32 For internal use only.
host-port-bits-
b
uint32 For internal use only.