HP MSA 2040 CLI Reference Guide

418 XML API basetype properties
fc-port
This basetype is used by show ports and show host-parameters for a Fibre Channel port.
Table 35 fc-port properties
Name Type Description
configured-
topology
string Configured topology.
• Loop: Fibre Channel arbitrated loop (public or private).
• PTP: Fibre Channel point-to-point. This is the default.
• Auto: Loop preferred, otherwise point-to-point, based on the detected
connection type.
primary-loop-id string If the port is using loop topology and the port status is Up, this field shows the
primary loop ID. If the port is not using loop topology or the port status is not Up,
this field shows N/A.
sfp-status string SFP status:
• OK
• Not present: No SFP is inserted in this port.
• Not compatible: The SFP in this port is not qualified for use in this
system. When this condition is detected, event 464 is logged.
• Incorrect protocol: The SFP protocol does not match the port
protocol. When this condition is detected, event 464 is logged.
sfp-present string Shows whether the port contains an SFP.
• Not Present
• Present
sfp-present-
numeric
uint32 Numeric equivalents for sfp-present values.
• 0: Not Present
• 1: Present
sfp-vendor string The SFP vendor.
sfp-part-number string The SFP part number.
sfp-revision string The SFP revision.
sfp-supported-
speeds
string The link speeds that the SFP supports.