HP MSA 2040 CLI Reference Guide

40 Alphabetical list of commands

clear expander-status

Description Clears the counters and status for SAS expander lanes. For use by or with direction from technical

support.

Counters and status can be reset to a good state for all enclosures, or for a specific enclosure whose

status is Error as shown by the show expander-status command.

NOTE: If a rescan is in progress, the clear operation will fail with an error message saying that an

EMP does exist. Wait for the rescan to complete and then retry the clear operation.

Syntax

clear expander-status

[enclosure

]

Parameters enclosure

Optional. The enclosure number.

Example Clear the expander status for the enclosure with ID 1:

# clear expander-status enclosure 1

Success: Command completed successfully. - Expander status was cleared.

(2012-01-18 14:18:53)