HP MSA 2040 CLI Reference Guide

386 XML API basetype properties
failed-over string Indicates whether the partner controller has failed over to this controller.
• No: The partner controller has not failed over to this controller.
• Yes: The partner controller has either failed or been shut down, and its
responsibilities have been taken over by this controller. There will be a delay
between the time that the value of the status property becomes Down for
one controller and the time that the value of the failed-over property
becomes Yes for the other controller. This time period is the time that it takes
for a controller to take over the responsibilities of its partner.
failed-over-
numeric
uint32 Numeric equivalents for failed-over values.
• 0: No
• 1: Yes
fail-over-
reason
string If failed-over is Yes, a reason for the failover appears; otherwise, Not
applicable appears.
fail-over-
reason-numeric
uint32 Numeric equivalents for fail-over-reason values.
sc-fw string Storage Controller firmware version.
vendor string Controller manufacturer.
model string Controller model.
sc-cpu-type string Storage Controller processor type.
sc-cpu-speed sint32 Storage Controller processor speed.
internal-
serial-number
string Internal serial number of the controller.
cache-lock string Shows whether hosts are prevented from using the SCSI MODE SELECT
command to change the storage system's write-back cache setting.
• No: Hosts are permitted to disable write-back cache.
• Yes: Hosts are prevented from disabling write-back cache. This is the
default.
cache-lock-
numeric
uint32 Numeric equivalents for cache-lock values.
• 0: No
• 1: Yes
write-policy string The current, system-wide cache policy as determined by auto-write-through
(AWT) logic. This value is not settable by users. If an AWT trigger condition
(such as a CompactFlash failure) is met, the cache policy for all volumes
changes to write-through, overriding the volume-specific settings. When the
problem is corrected, the cache policy reverts to the value configured for each
individual volume.
• write-back: This is the normal state.
• write-through
• Not up: The controller is not up.
write-policy-
numeric
uint32
Numeric equivalents for write-policy values.
• 0: write-back
• 1: write-through
• 2: Not up.
description string FRU long description.
part-number string Part number for the FRU.
revision string Hardware revision level for the FRU.
Table 19 controllers properties (continued)
Name Type Description