HP MSA 2040 CLI Reference Guide

370 XML API basetype properties
super-cap-
failure
string Shows whether the cache policy will change from write-back to write-through
when the supercapacitor that provides backup power for cache is not fully
charged or fails.
• Disabled: The supercapacitor failure trigger is disabled.
• Enabled: The supercapacitor failure trigger is enabled. This is the default.
super-cap-
failure-numeric
uint32 Numeric equivalents for super-cap-failure values.
• 0: Disabled
• 1: Enabled
compact-flash-
failure
string Shows whether the cache policy will change from write-back to write-through
when CompactFlash memory is not detected during POST (Power-On Self-Test),
fails during POST, or fails during controller operation.
• Disabled: The CompactFlash failure trigger is disabled.
• Enabled: The CompactFlash failure trigger is enabled. This is the default.
compact-flash-
failure-numeric
uint32 Numeric equivalents for compact-flash-failure values.
• 0: Disabled
• 1: Enabled
power-supply-
failure
string Shows whether the cache policy will change from write-back to write-through
when a power supply fails.
• Disabled: The power-supply failure trigger is disabled. This is the default.
• Enabled: The power-supply failure trigger is enabled.
power-supply-
failure-numeric
uint32 Numeric equivalents for power-supply-failure values.
• 0: Disabled
• 1: Enabled
fan-failure string Shows whether the cache policy will change from write-back to write-through
when a fan fails.
• Disabled: The fan failure trigger is disabled. This is the default.
• Enabled: The fan failure trigger is enabled.
fan-failure-
numeric
uint32 Numeric equivalents for fan-failure values.
• 0: Disabled
• 1: Enabled
temperature-
exceeded
string Shows whether the system will shut down a controller when its temperature
exceeds the critical operating range.
• Disabled: The over-temperature trigger is disabled. This is the default.
• Enabled: The over-temperature trigger is enabled.
temperature-
exceeded-
numeric
uint32 Numeric equivalents for
temperature-exceeded values.
• 0: Disabled
• 1: Enabled
partner-notify string Shows whether the partner controller will be notified when a trigger condition
occurs.
• Disabled: Notification is disabled; the partner controller will continue
using its current caching mode. This is the default.
• Enabled: Notification is enabled; the partner controller will change to
write-through mode for better data protection.
partner-notify-
numeric
uint32 Numeric equivalents for partner-notify values.
• 0: Disabled
• 1: Enabled
Table 9 advanced-settings-table properties (continued)
Name Type Description