HP MSA 2040 CLI Reference Guide

show users 325
show users
Description Shows configured user accounts.
Syntax
show users
[
user ]
[show-snmp-password]
Parameters user
Optional. User name to show settings for.
show-snmp-password
Optional. Minimum role: manage. For SNMPv3 users, this parameter shows Password and
Privacy Password values in clear text for reference when configuring users in the corresponding
management application. If this parameter is omitted, password values are displayed obscured for
security reasons.
Output Username
User name.
Roles
• monitor: User can view but not change system settings.
• manage: User can view and change system settings.
• admin: User can view and change system settings.
• diagnostic: User can view and change system settings.
User Type
The user’s experience level: Novice, Standard, Advanced, or Diagnostic. This parameter
does not affect access to commands.
User Locale
Display language for this user. The default is English.
WBI
• x: The user can access the web-browser interface (SMU). This is the default.
• (blank): The user cannot access this interface.
CLI
• x: The user can access the command-line interface. This is the default.
• (blank): The user cannot access this interface.
FTP
• x: The user can access the FTP interface.
• (blank): The user cannot access this interface. This is the default.
SMI-S
• x: The user can access the Storage Management Initiative Specification (SMI-S) interface.
• (blank): The user cannot access this interface. This is the default.
SNMP
• U: The user can access the SNMPv3 interface and view the MIB.
• T: The user can access the SNMPv3 interface and receive trap notifications.
• (blank): The user cannot access this interface. This is the default.
Authentication Type
• MD5: MD5 authentication. This is the default.
• SHA: SHA (Secure Hash Algorithm) authentication.
• none: No authentication.