HP MSA 2040 CLI Reference Guide

show replication-sets 287
show replication-sets
Description Shows information about replication sets in the local system. You can view information about all
replication sets or a specific replication set.
Syntax
show replication-sets
[
replication-set ]
Parameters replication-set
Optional. The name or serial number of a replication set or volume for which to display
replication-set-level information. If this parameter is omitted, information is shown for all replication
sets.
Output
Replication set information:
Name
Replication set name.
Serial Number
Replication set serial number.
Replication volume information:
Name
Replication volume name.
Serial Number
Replication volume serial number.
Status
Replication volume status:
• Initializing: The initial (full) replication to the volume is in progress.
• Online: The volume is online and is consistent with the last replicated image.
• Inconsistent: The volume is online but is in an inconsistent state. A full replication is required
to initialize it.
• Replicating: The volume is online and replication is in progress.
• Replicate-delay: The volume is online but the in-progress replication has been temporarily
delayed; a retry is occurring.
• Suspended: The volume is online but the in-progress replication has been suspended.
• Offline: The volume cannot be accessed or is unusable due to an error.
• Establishing proxy: The volume is establishing a proxy connection to a remote volume.
This will occur when a detached secondary volume is reattached and is re-establishing a
connection with the primary system in preparation for replication.
• Detached: The volume is detached for removal.
Status-Reason
More information about the status value, or N/A for Online status.
Monitor
Replication volume monitoring status:
• OK: Communication to the remote volume is successfully occurring on the FC or iSCSI network.
• Failed: Communication to the remote volume has failed because of an FC or iSCSI network
issue or because the remote volume has gone offline.
Location
Replication volume location: Local or Remote.
Primary-Volume
Primary volume name. If the replication set has a primary-volume conflict, all associated primary
volumes are displayed.