HP MSA 2040 CLI Reference Guide

show replication-images 285
Start Date/Time
Date and time when replication started on the replication volume.
Last Update
Date and time when the image was last updated (either due to an ongoing replication operation or
the replication being completed).
Suspended
Date and time when the image was suspended or resumed.
Est Complete
Estimated time when replication is expected to complete.
Time [HH:MM:SS]
Total time of replication (in hours, minutes, and seconds) including any suspension time.
Example Show information about replication images for replication set rsvol1:
# show replication-images rsvol1
Name Serial Number Type
-----------------------------------------------------------------
vd01_v001
SN Primary Volume
Image Serial Number Image Name Snapshot Serial Snapshot Name
Creation Date/Time
--------------------------------------------------------------------------
SN vd01_v001_i01 SN vd01_v001_i01
2012-01-18 14:24:33
SN vd01_v001_i02 SN vd01_v001_i02
2012-01-18 14:25:33
rvd01_v001 SN Secondary Volume
Image Serial Number Image Name Snapshot Serial Snapshot Name
Creation Date/Time
--------------------------------------------------------------------------
SN vd01_v001_i01 SN Snap12319447290
2012-01-18 14:52:09
Status Progress Start Date/Time Last Update Suspended
Est Complete Time [HH:MM:SS]
-----------------------------------------------------------------------
Complete N/A 2012-01-18 14:24:34 2012-01-18 14:52:09 N/A
N/A 00:27:35
SN vd01_v001_i02 SN Snap12319447530
2012-01-17 14:52:33
Status Progress Start Date/Time Last Update Suspended
Est Complete Time [HH:MM:SS]
-----------------------------------------------------------------------
Complete N/A 2012-01-18 14:52:09 2012-01-18 14:52:33 N/A
N/A 00:00:24
-----------------------------------------------------------------
Success: Command completed successfully. (2012-01-18 15:14:42)
Basetypes • replication-volume-summary
• status