HP MSA 2040 CLI Reference Guide

show ports 269
Example Show port information for a system with FC ports:
# show ports
Ports Media Target ID Status Speed(A) Speed(C) Health
Health Reason
Health Recommendation
-----------------------------------------------------------------------------
ID FC(P) WWPN Up 8Gb Auto OK
Topo(C)
-------
PTP
ID FC(-) WWPN Disconnected Auto N/A
There is no host connection to this host port.
- If this host port is intentionally unused, no action is required.
- Otherwise, use an appropriate interface cable to connect this host port
to a switch or host.
- If a cable is connected, check the cable and the switch or host for problems.
Topo(C)
-------
PTP
...
-----------------------------------------------------------------------------
Success: Command completed successfully. (2013-02-03 17:01:03)
Show port information for a system with iSCSI ports using IPv4:
# show ports
Ports Media Target ID Status Speed(A) Speed(C) Health
Health Reason Health Recommendation
-----------------------------------------------------------------------------
ID iSCSI IQN Up 1Gb Auto OK
Port Details
------------
IP Version: IPv4
IP Address: 10.134.9.100
Gateway: 10.134.0.1
Netmask: 255.255.0.0
MAC: 00:C0:FF:29:00:24
...
------------------------------------------------------------------------------
Success: Command completed successfully. (2013-06-25 02:18:16)