HP MSA 2040 CLI Reference Guide

show network-parameters 265
Show network parameters for a storage system using manual addressing:
# show network-parameters
Network Parameters Controller A
-------------------------------
IP Address: 172.22.1.200
Gateway: 172.22.1.1
Subnet Mask: 255.255.255.0
MAC Address:
value
Addressing Mode: Manual
...
Network Parameters Controller B
-------------------------------
IP Address: 172.22.1.201
Gateway: 172.22.1.1
Subnet Mask: 255.255.255.0
MAC Address:
value
Addressing Mode: Manual
...
Basetypes • network-parameters
• status
See also • set network-parameters