HP MSA 2040 CLI Reference Guide

264
show network-parameters
Description Shows the settings and health of each controller module’s network port.
Syntax
show network-parameters
Output IP Address
Network port IP address
Gateway
Network port gateway IP address
Subnet Mask
Network port IP subnet mask
MAC Address
Controller’s unique Media Access Control address
Addressing Mode
• Manual: Network settings set manually (statically)
• DHCP: DHCP used to set network parameters
Health
The health of the network connection.
• OK
• Degraded
• N/A
• Unknown
Health Reason
If Health is not OK, this field shows the reason for the health state.
Health Recommendation
If Health is not OK, this field shows recommended actions to take to resolve the health issue.
Example Show network parameters for a storage system using DHCP:
# show network-parameters
Network Parameters Controller A
-------------------------------
IP Address: 10.134.129.188
Gateway: 10.134.0.1
Subnet Mask: 255.255.0.0
MAC Address:
value
Addressing Mode: DHCP
Health: OK
Health Reason:
Health Recommendation:
Network Parameters Controller B
-------------------------------
IP Address: 10.134.129.189
Gateway: 10.134.0.1
Subnet Mask: 255.255.0.0
MAC Address:
value
Addressing Mode: DHCP
Health: OK
Health Reason:
Health Recommendation:
Success: Command completed successfully. (2012-10-29 15:09:03)