HP MSA 2040 CLI Reference Guide

226
How Used
• AVAIL: Available
• FAILED: The disk is unusable and must be replaced. Reasons for this status include: excessive
media errors; SMART error; disk hardware failure; unsupported disk.
• GLOBAL SP: Global spare
• LEFTOVR: Leftover
• UNUSABLE: The disk cannot be used in a vdisk because the system is secured and the disk is not
FDE-capable or because the disk is locked to data access.
• VDISK: Used in a vdisk
• VDISK SP: Spare assigned to a vdisk
Any jobs running on the disk or its vdisk follow the How Used value:
• DRSC: The disk is being scrubbed.
• EXPD: The vdisk is being expanded.
• INIT: The vdisk is being initialized.
• RCON: The vdisk is being reconstructed.
• VRFY: The vdisk is being verified.
• VRSC: The vdisk is being scrubbed.
Type
• SAS: Enterprise SAS
• SAS MDL: Midline SAS
• sSAS: SAS SSD
Speed (kr/min)
The speed of a spinning disk, in thousands of revolutions per minute, as specified by the disk vendor.
For an SSD, 0 is shown.
Life Remaining%
• 100%–0%: For an SSD, this field shows the percentage of disk life remaining. When the value
decreases to 20%, event 502 is logged with Informational severity. Event 502 is logged again
with Warning severity when the value decreases to 5%, 2%, and 0%.
• N/A: The disk is not an SSD.
FDE State
The FDE state of the disk:
• Not FDE Capable: The disk is not FDE-capable.
• Not Secured: The disk is not secured.
• Secured, Unlocked: The system is secured and the disk is unlocked.
• Secured, Locked: The system is secured and the disk is locked to data access, preventing its
use.
• FDE Protocol Failure: A temporary state that can occur while the system is securing the
disk.
Lock Key ID
The current lock key ID.
Health
• OK
• Degraded
• Fault
• N/A
• Unknown