HP MSA 2040 CLI Reference Guide

set expander-phy 157
Enable the PHY for disk 5 in controller B, and check the resulting status:
# set expander-phy encl 1 controller b type drive phy 5 enabled
Success: Command completed successfully. - Enabled PHY 5 on controller b in
enclosure 1. (PHY type: drive) (2012-01-21 12:07:50)
# show expander-status
Encl Ctlr Phy Type Status Elem Status Disabled Reason
-----------------------------------------------------------------------------
...
1 B 5 Drive Enabled-Healthy OK Enabled
-----------------------------------------------------------------------------
Success: Command completed successfully. (2012-01-21 12:03:42)
See also • set expander-fault-isolation
• show enclosures
• show expander-status