HP MSA Events Description Reference Guide (762785-001, March 2014)

38 Event descriptions
259
Info. In-band CAPI commands have been disabled.
Recommended actions
• No action is required.
260
Info. In-band CAPI commands have been enabled.
Recommended actions
• No action is required.
261
Info. In-band SES commands have been disabled.
Recommended actions
• No action is required.
262
Info. In-band SES commands have been enabled.
Recommended actions
• No action is required.
263
Warning The indicated spare disk is missing. Either it was removed or it is not responding.
Recommended actions
• Replace the disk with one of the same type (SAS SSD, enterprise SAS, or midline SAS) and the same
or greater capacity.
• Configure the disk as a spare.
266
Info. A volume-copy operation for the indicated master volume has been aborted by a user.
Recommended actions
• No action is required.
267
Error While cleaning up resources in metadata at the end of a volume-copy operation, the firmware found at
least one error for the indicated volume.
Recommended actions
• Make sure that the vdisks and disks associated with the volume copy do not have problems (health
OK, status FTOL or UP) and then retry the volume copy.
268
Info. A volume-copy operation for the indicated volume has completed.
Recommended actions
• No action is required.