HP MSA 2040 CLI Reference Guide

create user 65
level monitor|manage|admin
Optional.
• monitor: User can view but not change system settings. This is the default.
• manage: User can view and change system settings.
• admin: User can view and change system settings.
You cannot specify both this parameter and the roles parameter.
locale English|en|Spanish|es|French|fr|German|de|Italian|it|Japanese|ja
|Korean|ko|Dutch|nl|Chinese-simplified|zh-s|Chinese-traditional|zh-t
Optional. The display language. The default is English.
password
password
Optional in console format; required for XML API format. Sets a new password for the user. The value
is case sensitive and must contain 8–32 characters. A password cannot contain the following
characters: angle brackets, backslash, comma, double quote, single quote, or space. If the password
contains only printable ASCII characters then it must contain at least one uppercase character, one
lowercase character, and one non-alphabetic character. If this parameter is omitted, the command
prompts you to enter and re-enter a value, which is displayed obscured for security reasons. For an
SNMPv3 user whose authentication-type parameter is set to use authentication, this specifies
the authentication password.
precision
#
Optional. Sets the number of decimal places (1–10) for display of storage-space sizes. The default
is 1.
privacy-password
encryption-password
Optional. For an SNMPv3 user whose privacy-type parameter is set to use encryption, this
specifies the encryption password. The value is case sensitive and must contain 8–32 characters. A
password cannot contain the following characters: angle brackets, backslash, comma, double quote,
single quote, or space. If the password contains only printable ASCII characters then it must contain
at least one uppercase character, one lowercase character, and one non-alphabetic character.
privacy-type DES|AES|none
Optional. For an SNMPv3 user, this specifies whether to use a security encryption protocol. This
parameter requires the privacy-password parameter and the authentication-type
parameter.
• DES: Data Encryption Standard.
• AES: Advanced Encryption Standard.
• none: No encryption. This is the default.
roles
roles
Optional. Specifies the user’s roles as one or more of the following values:
• monitor: User can view but not change system settings. This is the default.
• manage: User can view and change system settings.
• diagnostic: User can view and change system settings.
Multiple values must be separated with a comma (with no spaces). If multiple values are specified,
the user’s access to commands will be determined by the highest-level role specified. You cannot
specify both this parameter and the level parameter.
storage-size-base 2|10
Optional. Alias for base.
storage-size-precision
#
Optional. Alias for precision.
storage-size-units auto|MB|GB|TB
Optional. Alias for units.