HP MSA 2040 CLI Reference Guide

volume-view-mappings 515
volume-view-mappings
This basetype is used by show volume-maps.
Table 100 volume-view-mappings properties
Name Type Description
durable-id string Volume ID in the form V # , where # starts at 1 and increments for each new
volume to uniquely identify it. The value is generated from available data in the
current CLI session and may change after an MC restart.
parent-id string Not applicable.
mapped-id string Not applicable.
ports string • Controller host ports that the mapping applies to.
• Blank if not mapped or mapped as no-access.
lun string • LUN that identifies the volume to a host.
• Blank if not mapped or mapped as no-access.
access string Type of host access to the volume.
• read-write: The host has read and write access to the volume. This is the
default.
• read-only: The host has read access to the volume.
• no-access: The host is denied access to the volume.
• not-mapped: The host is not mapped to the volume.
identifier string • For an FC or SAS host port, the host WWPN.
• For an iSCSI host port, the host initiator node name (typically the IQN).
• For any host that is not explicitly mapped, all other hosts.
nickname string • Host nickname.
• Blank if not set or for all other hosts.
host-profile string • Standard: Default profile.
• HP-UX: The host uses Flat Space Addressing.