HP MSA 2040 CLI Reference Guide

448 XML API basetype properties
remote-addresses
This basetype is used by show replication-volumes.
Table 57 remote-addresses properties
Name Type Description
connected-ports string • port-IDs: For a remote primary or secondary volume, the IDs of up to two
hosts ports in the local system that are connected to the remote system. If two
ports are connected but only one is shown, this indicates that a problem is
preventing half the available bandwidth from being used.
• N/A: For a local primary or secondary volume.
remote-address string The address of each host port in the remote system through which the volume is
accessible.