HP MSA 2040 CLI Reference Guide

io-modules 425
io-modules
This basetype is used by show enclosures.
Table 42 io-modules properties
Name Type Description
durable-id string I/O module ID.
controller-id string • A: Controller A.
• B: Controller B.
controller-id-
numeric
uint32 Numeric equivalents for controller-id values.
• 0: B
• 1: A
name string FRU name.
description string FRU long description.
part-number string FRU part number.
serial-number string FRU serial number.
revision string FRU hardware revision level.
dash-level string FRU template revision number.
fru-shortname string FRU short description.
mfg-date string Date and time, in the format
year-month-day hour : minutes : seconds
(UTC), when the controller's PCBA was programmed or a power supply module
was manufactured.
mfg-date-
numeric
uint32 Unformatted mfg-date value.
mfg-location string City, state/province, and country where the FRU was manufactured.
mfg-vendor-id string JEDEC ID of the FRU manufacturer.
position string Fan unit position, as viewed from the back of the enclosure.
• Top
• Bottom
• Left
• Right
position-
numeric
uint32 Numeric equivalents for position values.
• 0: Top
• 1: Bottom
• 2: Left
• 3: Right
configuration-
serialnumber
string Configuration serial number.
phy-isolation string Shows whether the automatic disabling of SAS expander PHYs having high error
counts is enabled or disabled for this controller.
• Enabled: PHY fault isolation is enabled. This is the default.
• Disabled: PHY fault isolation is disabled.
phy-isolation-
numeric
uint32 Numeric equivalents for phy-isolation values.
• 0: Enabled
• 1: Disabled