HP MSA 2040 CLI Reference Guide

disk-statistics 397
disk-statistics
This basetype is used by show disk-statistics when the historical parameter is omitted.
Table 23 disk-statistics properties
Name Type Description
durable-id string Disk ID in the form disk_ enclosure-number.disk-number .
serial-number string Disk serial number.
bytes-per-
second
string Data transfer rate calculated over the interval since these statistics were last
requested or reset. This value will be zero if it has not been requested or reset
since a controller restart.
bytes-per-
second-numeric
string Unformatted bytes-per-second value.
iops uint32 Input/output operations per second, calculated over the interval since these
statistics were last requested or reset. This value will be zero if it has not been
requested or reset since a controller restart.
number-of-reads uint64 Number of read operations since these statistics were last reset or since the
controller was restarted.
number-of-
writes
uint64 Number of write operations since these statistics were last reset or since the
controller was restarted.
data-read string Amount of data read since these statistics were last reset or since the controller
was restarted.
data-read-
numeric
uint32 Unformatted data-read value.
data-written string Amount of data written since these statistics were last reset or since the controller
was restarted.
data-written-
numeric
uint32 Unformatted data-written value.
queue-depth uint32 Number of pending I/O operations currently being serviced.
reset-time string Date and time, in the format
year-month-day hour : minutes : seconds ,
when these statistics were last reset, either by a user or by a controller restart.
reset-time-
numeric
uint32 Unformatted reset-time value.
start-sample-
time
string Date and time, in the format
year-month-day hour : minutes : seconds ,
when sampling started for the iops and bytes-per-second values.
start-sample-
time-numeric
uint32 Unformatted start-sample-time value.
stop-sample-
time
string Date and time, in the format
year-month-day hour : minutes : seconds ,
when sampling stopped for the iops and bytes-per-second values.
stop-sample-
time-numeric
uint32 Unformatted stop-sample-time value.
smart-count-1 uint32 For port 1, the number of SMART events recorded.
io-timeout-
count-1
uint32 For port 1, the number of timeouts accessing the disk.
no-response-
count-1
uint32 For port 1, the number of times the disk did not respond.
spinup-retry-
count-1
uint32 For port 1, the number of attempts by the storage system to spin up the disk.