HP MSA 2040 CLI Reference Guide

266

show ntp-status

show output-format (Deprecated)

Use show cli-parameters.

show port-wwn (Deprecated)

Use show ports.

Description Shows the status of the use of Network Time Protocol (NTP) in the system.

Syntax

show ntp-status

Output NTP Status

• activated: NTP is enabled

• deactivated: NTP is disabled

NTP Server Address

• The current NTP server IP address if NTP is enabled.

• The last-set NTP server IP address if NTP was enabled and has been disabled.

• 0.0.0.0 if the NTP server IP address has not been set.

Last Server Contact

Date and time in the format

year-month-day hour

minutes

seconds

of the last message

received from the NTP server; or none

Example Show NTP status for the system:

# show ntp-status

NTP Status

----------

NTP Status: activated

NTP Server Address: 69.10.36.3

Last Server Contact: 2012-01-18 15:30:44

Success: Command completed successfully. (2012-01-18 15:39:41)

Basetypes • ntp-status

• status