HP MSA 2040 CLI Reference Guide

218
Example Show controller information:
# show controllers
Controllers
-----------
Controller ID: A
Serial Number:
SN
Hardware Version: value
CPLD Version: value
MAC Address: value
WWNN: WWNN
IP Address: 10.134.63.2
IP Subnet Mask: 255.255.0.0
IP Gateway: 10.134.0.1
Disks: 17
Vdisks: 6
Cache Memory Size (MB): 4096
Host Ports: 4
Disk Channels: 2
Disk Bus Type: SAS
Status: Operational
Failed Over to This Controller: No
Fail Over Reason: Not applicable
Health: OK
Health Reason:
Health Recommendation:
Position: Top
Phy Isolation: Enabled
Controller Redundancy Mode: Active-Active ULP
Controller Redundancy Status: Redundant
Controllers
-----------
Controller ID: B
...
Success: Command completed successfully. (2012-01-18 14:58:54)
Basetypes • controllers
• status
See also • show configuration
• show frus