HP MSA 2040 CLI Reference Guide

176

activity enabled|disabled|on|off

Optional. Enables or disables access to the activity progress interface via HTTP port 8081. This

mechanism reports whether a firmware update or partner firmware update operation is active and

shows the progress through each step of the operation. In addition, when the update operation

completes, status is presented indicating either the successful completion, or an error indication if the

operation failed. This is disabled by default.

Example Disable unsecure HTTP connections and enable FTP:

# set protocols http disabled ftp enabled

Success: Command completed successfully. (2012-01-21 14:46:55)