HP MSA 1040 CLI Reference Guide (762782-001, March 2014)

ntp-status 423
ntp-status
This basetype is used by show ntp-status.
Table 48 ntp-status properties
Name Type Description
ntp-status string Shows whether use of Network Time Protocol (NTP) is enabled.
• activated: NTP is enabled.
• deactivated: NTP is disabled. This is the default.
ntp-server-
address
string • The current NTP server IP address if NTP is enabled.
• The last-set NTP server IP address if NTP was enabled and has been
disabled.
• 0.0.0.0 if the NTP server IP address has not been set.
ntp-contact-
time
string • Date and time, in the format
year-month-day
hour
: minutes : seconds (UTC), of the last message received from the
NTP server.
• none: No contact.