HP MSA 1040 CLI Reference Guide (762782-001, March 2014)

advanced-settings-table 359
auto-write-back string Shows whether the cache policy will change from write-through to write-back
when the trigger condition is cleared.
• Disabled: Auto-write-back is disabled.
• Enabled: Auto-write-back is enabled. This is the default.
auto-write-
back-numeric
uint32 Numeric equivalents for auto-write-back values.
• 0: Disabled
• 1: Enabled
disk-dsd-enable string Shows whether available disks and global spares will spin down after a period
of inactivity shown by the disk-dsd-delay property.
• Disabled: Drive spin down for available disks and global spares is
disabled. This is the default.
• Enabled: Drive spin down for available disks and global spares is
enabled.
disk-dsd-
enable-numeric
uint32 Numeric equivalents for disk-dsd-enable values.
• 0: Disabled
• 1: Enabled
disk-dsd-delay uint16 Specifies the period of inactivity in minutes after which available disks and
global spares will spin down. The value 0 means spin down is disabled. The
default is 15 minutes.
background-
disk-scrub
string Shows whether disks that are not in vdisks are automatically checked for disk
defects to ensure system health. The interval between background disk scrub
finishing and starting again is 72 hours.
• Disabled: Background disk scrub is disabled. This is the default.
• Enabled: Background disk scrub is enabled.
background-
disk-scrub-
numeric
uint32 Numeric equivalents for background-disk-scrub values.
• 0: Disabled
• 1: Enabled
managed-logs string Shows whether the managed logs feature is enabled, which allows log files to
be transferred from the storage system to a log-collection system to avoid losing
diagnostic data as logs fill.
• Disabled: The managed logs feature is disabled. This is the default.
• Enabled: The managed logs feature is enabled.
managed-logs-
numeric
uint32 Numeric equivalents for managed-logs values.
• 0: Disabled
• 1: Enabled
single-
controller
string Not supported.
single-
controller-
numeric
string Numeric equivalents for
single-controller values.
• 0: Disabled
• 1: Enabled
disk-
protection-info
string Not supported.
disk-
protection-
info-numeric
uint32 Not supported.
Table 9 advanced-settings-table properties (continued)
Name Type Description