HP MSA 1040 CLI Reference Guide (762782-001, March 2014)

unfail controller 345
unfail controller
Description Allows the partner controller module to recover from a simulated failure performed with the fail
command (which requires the manage role). If you attempt to unfail a controller that is operating, the
command will have no effect.
Syntax
unfail controller
Example From controller A, unfail the partner controller (B):
# unfail controller b
Success: Command completed successfully. - Successfully unfailed (unkilled)
Storage Controller B. (2013-08-08 16:30:20)
See also • fail
• show controllers