HP MPX200 Multifunction Router Remote CLI User Guide (5697-2510, April 2013)

• true
• false
The default is the current setting on the router.
Specifies a symbolic name for the router.-name=
The name can be blank, or contain a maximum of 63 alphanumeric characters,
spaces, and symbols.
Specifies whether SSH is enabled or disabled for the router. Values are:-ssh=
• yes
• no
• on
• off
• true
• false
The default is the current setting on the router.
Specifies whether target access control is enabled or disabled. Values are:-target_access_control=
• yes
• no
• on
• off
• true
• false
The default is the current setting on the router.
Specifies the target presentation mode. Values are:-target_presentation_mode=
• auto
• manual
The default is the current setting on the router.
Specifies whether Telnet is enabled or disabled for the router. Values are:-telnet=
• yes
• no
• on
• off
• true
• false
The default is the current setting on the router.
Example
c:\> rcli set system -lun_mapping=off /ip=10.0.0.12
[10.0.0.12]
nl
setBridgeInfo completed successfully
*** REBOOT REQUIRED ***
set time
The set time command sets the date and time on the router.
NOTE: You must use one of the optional keywords.
set time 61