HP MPX200 Data Migration Planning Guide

• Limit access to iSCSI initiator name. Enter the iSCSI initiator name in the box.
iii. Under Access Types, click Set read-write.
iv. Click Next.
Figure 78 Creating a volume — step 3
5. On Step 4 – Summary, review your volume settings and then click Finish to create the volume
or Back to view and change any of the settings.
6. Review the settings of the newly created volume as follows:
a. In the tree in the left pane, expand the Volumes branch, and then locate the volume.
b. Right-click the volume name, and then on the shortcut menu, click View iSCSI settings.
c. On the Volume iSCSI Properties dialog box, review the volume settings, and then click
OK.
Assigning LUNs from a Dell EqualLogic Array 83