HP MPX200 Data Migration Planning Guide

10. In the left pane under the Servers node, select the newly created host, and in the right pane:
a. Click the Volumes button to view the list of volumes mapped to that host.
b. Click the Properties button to view the general host properties on the Server Properties
dialog box (Figure 74 (page 80)).
Figure 74 Viewing host server properties
c. Click OK to close the dialog box.
Assigning LUNs from a Dell EqualLogic Array
DellStorage vendor
EqualLogic PS100 Array (Model 70-0011)Array model
EqualLogic Group ManagerLUN assignment tool
To assign LUNs:
1. Connect the iSCSI ports of the data migration appliance to a switch where the storage controller
ports of array are also logged.
2. In a Web browser, open the EqualLogic Group Manager utility using the IP address assigned
to the storage controller. Figure 75 (page 81) shows an example.
80 Assigning LUNs to the MPX200 for data migration