HP MPX200 Data Migration Planning Guide

Assigning LUNs from a Dell Compellent Array
DellStorage vendor
Dell Compellent Storage CenterArray model
Dell Compellent Storage CenterLUN assignment tool
To assign LUNs:
1. Perform zoning:
a. Connect the FC ports of the data migration appliance to a switch where the storage
controller ports are also logged.
b. Using switch management tools, create a zone, DM_Host_DC.
c. In this zone, add the WWPN of the data migration appliance FC ports and storage
controller ports.
d. Save the zoning information and activate the new zoning configuration.
2. Open the Compellent Storage Center GUI using the IP assigned to the storage controller.
3. In the left pane, select the Servers node, and click the Create Server button.
4. Complete the Add HBAs to Server dialog box (Figure 71 (page 78)):
a. Click Refresh.
b. Select the Include check box for each WWPN associated with the data migration
appliance.
c. Click Continue.
Figure 71 Adding HBAs to the server
5. Complete the Create Server dialog box:
a. In the Name box, enter a user-defined server name.
b. In the Operating System box, select Windows 2008 MPIO.
c. Click Continue.
78 Assigning LUNs to the MPX200 for data migration