HP MPX200 Data Migration Planning Guide

Figure 64 Creating a controller adapter port group
6. Create a host group (see Figure 65 (page 73)):
a. In the left pane, click Host Group.
b. In the right pane, click the FC/FCoE Host.
c. In the New Group Name box, enter a name for the data migration appliance.
d. Select all WWNs that belong to this data migration appliance’s VPG.
e. To detect the connected ports, click Rediscover.
NOTE: If the zoned data migration appliance port is not visible by default, manually
enter the WWPN on the Manual Input page. If more than one VPG is enabled and used,
create an individual host group for each VPG.
f. Select the host response for the host created in Step 5.
g. To confirm, click Add.
Figure 65 Creating a host group
Assigning LUNs from ETERNUS arrays 73