HP MPX200 Data Migration Planning Guide

Figure 54 Creating an initiator group
d. Verify that the igroup is configured correctly.
9. To map a LUN to a host igroup:
a. In the left pane under LUN, click manage.
b. On the LUN Table page, select a LUN, and click map.
c. Complete the LUN map information (see Figure 55 (page 64)):
i. Select the appropriate Vserver Name.
ii. Enter the LUN Path, Initiator Group Name, and LUN ID in the appropriate boxes.
iii. Click map.
Figure 55 Creating a LUN Map
10. To map additional LUNs, repeat the preceding step.
Assigning LUNs from a NetApp E-Series array
NetAppStorage vendor
NetApp E-Series (formerly LSI)Array model
SANtricity ESLUN assignment tool
To assign LUNs:
64 Assigning LUNs to the MPX200 for data migration