HP MPX200 Data Migration Planning Guide

Figure 49 Adding an Initiator Group
6. On the Initiator Groups page under Initiator IDs, click the Add button.
7. Complete the Add Initiator ID dialog box (see Figure 50 (page 60)):
a. For Group Type, select FCP.
b. For Group Name, select the user-defined name that you specified in Step 5
(DM-Appliance, for example).
c. In the Initiator Name box, type the WWPN of the appliance.
d. Click Add.
Figure 50 Adding an Initiator ID
8. Repeat Step 7 to add the WWPN of each virtual port.
NOTE: If more than one virtual port is enabled and used, create an initiator group for each
virtual port group.
60 Assigning LUNs to the MPX200 for data migration