HP MPX200 Data Migration Planning Guide

Figure 34 Defining additional mapping
9. Refresh the data migration user interface to see if the LUN assignment is reflected properly,
and that the appropriate array entity appears under FC Array. (You may need to click the
Refresh button several times to correctly reflect the changes.)
Assigning LUNs from an IBM V7000 Array
IBMStorage vendor
IBM Storwize V7000 disk systemArray model
IBM Storwize V7000 management utilityLUN assignment tool
To assign LUNs:
1. Perform zoning:
a. Connect the FC ports of the data migration appliance to a switch where the storage
controller ports are also logged.
b. Use switch management tools to create a zone, DM_Host_IBMV7000.
c. In this zone, add the WWPN of the data migration appliance FC ports and storage
controller ports.
d. Save the zoning information and activate the new zoning configuration.
Assigning LUNs from IBM Arrays 49