HP MPX200 Data Migration Planning Guide

Figure 30 Selecting devices
10. In the right pane under 6. Summary, review your masking selections and either click Back to
modify a previous step, click Next to continue, or click Finish to close the masking wizard and
return to the Tasks page of the EMC Symmetrix Management console.
A message box informs you that the Symmetrix device masking session completed successfully.
Assigning LUNs from IBM Arrays
Assigning LUNs from an IBM DS4000, DS5000, or LSI array
IBMStorage vendor
IBM DS4000/Engineo series arraysArray model
Storage Manager Client 1eLUN assignment tool
To assign LUNs:
1. Perform zoning:
a. Connect the FC ports of the data migration appliance to a switch where the storage
controller ports are also logged.
b. Use switch management tools to create a zone, DM_Host_IBM.
c. In this zone, add the WWPN of the data migration appliance FC ports and storage
controller ports.
d. Save the zoning information and activate the new zoning configuration.
2. Open the Storage Manager Client configuration utility, and select the array to manage.
3. On the Subsystem Management window, in the left pane, select the Mappings View tab.
4. In the left pane, right-click Default Group, point to Define, and click Host. (see Figure 31 (page
47)).
46 Assigning LUNs to the MPX200 for data migration