HP MPX200 Data Migration Planning Guide

9. In the left pane, click the Options node, and at the bottom of the right pane, click Simple
Setting.
10. Complete the Simple Setting dialog box:
a. Next to Platform, select Windows2003.
b. Keep the other settings as default.
c. To save the changes, click OK.
11. In the Array System Viewer dialog box, under the DM-Host group, click the WWN node. Then,
at the bottom of the right pane, click Modify WWN Information (see Figure 21 (page 37)).
Figure 21 Array System Viewer
12. Complete the Modify WWN Information dialog box:
a. Under Assignable WWN, click the WWN of the data migration appliance.
b. Click Add.
c. To accept and save the WWN information, click OK.
13. Under the DM-Host group, click the Logical Unit node. Then, at the bottom of the right pane,
click Modify Mapping.
Assigning LUNs from an HDS Array 37