HP MPX200 Data Migration Planning Guide

Figure 17 Presenting Vdisks
8. Refresh the data migration user interface to see if the LUN assignment is reflected properly,
and that the appropriate array entity appears under FC Array. (You may need to click the
Refresh button several times to correctly reflect the changes.)
Assigning LUNs from an HDS Array
HDSStorage vendor
AMS/WMS series arraysArray model
Storage Navigator Modular user interfaceLUN assignment tool
To assign LUNs:
1. Perform zoning:
a. Connect the FC ports of the data migration appliance to a switch where the storage
controller ports are also logged.
b. Use switch management tools to create a zone, DM_Host_HDS.
c. In this zone, add the WWPN of the data migration appliance FC ports and storage
controller ports.
d. Save the zoning information and activate the new zoning configuration.
2. Open the Storage Navigator Modular application. If you are using the tool for the first time,
you may have to discover the array using the IP assigned to the storage controller.
3. On the Tool menu, select Operation Mode > Change, and then change to Management Mode
(see Figure 18 (page 35)).
34 Assigning LUNs to the MPX200 for data migration