HP MPX200 Data Migration Planning Guide

Figure 15 Adding a Host
6. If you have a multipath configuration, add the second router port to the DM-Host entity (see
Figure 16 (page 33)):
a. Under the Hosts tree in the left pane, select the DM-Host node.
b. In the right pane, select the Ports tab.
c. On the Add a Host Port page, select a WWN, and click the Add port button.
Figure 16 Adding a second host port
7. Present virtual disks (see Figure 17 (page 34)):
a. In the left pane, double-click the Virtual Disks node.
b. Click the LUN to be presented to the data migration appliance for data migration.
c. In the right pane, select the Presentation tab, and click the DM-Host.
d. To accept and save the LUN assignment, click Present Vdisk.
Assigning LUNs from HP arrays 33