HP MPX200 Data Migration Planning Guide

Assigning LUNs from an HP EVA 4/6/8000 Series Array
HPStorage vendor
EVA 4/6/8000 series arraysArray model
Command View user interfaceLUN assignment tool
To assign LUNs:
1. Perform zoning:
a. Connect the FC ports of the data migration appliance to a switch where the storage
controller ports are also logged.
b. Use switch management tools to create a zone, DM_Host_EVA.
c. In this zone, add the WWPN of the data migration appliance FC ports and storage
controller ports.
d. Save the zoning information and activate the new zoning configuration.
2. Open the HP Command View EVA application, as shown in Figure 14 (page 32).
Assigning LUNs from HP arrays 31