Qlogic Online Data Migration Using the iSR6200 in Cluster Configurations (ISR651405-00 A, December 2011)

6 – Inserting the Router into a Solaris Cluster
ISR651405-00 A 9
8. After the paths are removed on the host, add a router-presented target path.
9. Check the path status on the cluster nodes to ensure that the nodes show router-presented paths.
10.Repeat Step 8 and Step 9 until all direct paths are removed and replaced with router-presented paths.
11. Verify that the newly added paths are seen on Solaris cluster nodes.
12.After the router is completely inserted in the data path, you can start the migration job for the shared
devices.