HP Embedded Digital Sending - Configuring Embedded Kerberos Authentication

configure – 13
Step 4: Configure the Authentication Manager
1. Click Authentication Manager on the left-side menu.
2. On the Authentication Manager screen, select Kerberos Authentication from the
Authentication method drop-down list.
3. Click Apply.
Step 5: Configure Addressing Settings
1. Click the Digital Sending tab.
2. Select Addressing from the right-side menu.
3. Select the “Allow device to directly access an LDAP Address Book” check box
(screenshot on next page).
4. Under the Accessing to LDAP Server section,
a. Select Kerberos from the LDAP Server Bind Method drop-down list.
w The LDAP Server Bind Methods on the Addressing Settings and
Kerberos Authentication screens must match for Kerberos authentication
to work properly.
b. Under Credentials, select the Use Public Credentials radial dial.
w Input the Username and Password.