HP Embedded Digital Sending - Configuring Embedded Kerberos Authentication

10 – configure
9. On the LDP screen, locate the user DN from the returned results. Copy it for use
in the Embedded Web Server (EWS).
• The Search Prefix begins after the individual user CN.
Hint
Notice how the username is set up on the LDP screen. The username
format is defined within the device user DN. This can be viewed in
the LDP trace. The format is often in email address format, but can
be defined in many different combinations. The example below is
User1.
Step 3: Kerberos Authentication
Note
Embedded Kerberos Authentication uses session tickets in the authentication process. The
session tickets are time stamped by both the Kerberos Domain Controller (KDC) and the MFP. It
is essential that the stamped times are within five minutes of each other. This can be
accomplished by setting identical time on both the KDC and MFP.
1. Open the EWS in a web browser.
2. Select the Settings tab, and then Kerberos Authentication.
3. Under the Accessing the Kerberos Authentication Server section,
a. Enter the Kerberos Default Realm (Domain).
w The Kerberos Default Realm (Domain) is case-sensitive and needs to be
input using capital letters. Example: TECHNICAL.MARKETING.COM