HP Embedded Digital Sending - Configuring Embedded Kerberos Authentication

configure – 7
Step 2: Setting up LDP
1. Open LDP by clicking on Start → Run, and typing ldp.exe; then press Enter
or click OK.
2. From the Ldp menu, select Connection → Connect.
3. In the Connect window, input the IP address or hostname of the LDAP server in
the Server box; then input 389 or 3268 as the Port number. Click OK.
• Port 389 is the standard LDAP port. However, it may be necessary to use
port 3268 when communicating with a Windows Global Catalog Active
Directory Server.