Building Disaster Recovery Serviceguard Solutions Using Metrocluster with Continuous Access for P9000 and XP A.11.00

Table 9 Error Messages and their resolution (continued)
ResolutionCauseLog Messages
Fix the issue that resulted in the CVM
commands failing and restart the Site
Controller Package.
This message is logged
because the CVM
commands failed.
Error: Not able to find CVM master node to
import CVM DG(s)
or
Error Failed to start the CVM DG
<cvm_dg_name> Volumes
Rename the environment file according to
the convention specified. For Example, if
This error occurs when an
environmental file is
Validating Metrocluster Configuration
ERROR: Environment file name is improper
this error occurred for an MC XPCAalready present in the
ERROR: Failed to validate
/etc/cmcluster/scripts/dts/xpca.sh
package, then rename the environment file
as SG_PACKAGE_NAME_xpca.env
directory that is specified
as the value for the
dts/dts/dts_pkg_dir
Site Controller package validation successful
parameter, and if it is not
consistent with the
environment file naming
convention.
90 Troubleshooting