Building Disaster Recovery Serviceguard Solutions Using Metrocluster with Continuous Access for P9000 and XP A.11.00

NOTE:
• Remote command device can be configured in Continentalclusters.
• Remote command device need not be configured when P9000 or XP Continuous Access
Journal replication is used.
Configuring a remote array RAID Manager instance
To configure the remote array RAID Manager instance in a Metrocluster environment with Continuous
Access P9000 or XP:
1. Configure the command device to manage the remote P9000 or XP arrays.The XP array at
every site must have a command device exclusively for the nodes in the other site.
2. Configure the remote array RAID Manager instance on all the nodes in every site to manage
the remote P9000 or XP array. The RAID Manager instance that manages the local array is
referred as the local array RAID Manager.
3. Configure remote array RAID Manager instance in the /etc/rc.config.d/raidmgr file
for automatic startup.
56 Metrocluster features