SL Server Cabling configurations for the HP StorageWorks 600 Modular Disk System Configuration Guide

Cabling 6

Item Description

6 SAS port 2 connector

Using either of the Secondary I/O module drawers for Smart Array Controller cabling is an unsupported

configuration.

Only one SAS port connection on each Primary I/O module is a supported configuration. It is

recommended to connect cables to SAS port 1 connectors.

No cables ship with the MDS600. The only supported cable length that can be used is the 2.00m (6.56

ft.) mini-SAS cable.

8x wide SAS cables are not supported.

Always be sure that the servers attached to the MDS600 are powered down before connecting SAS

cables.