HP Matrix Operating Environment 7.3 Release Notes

NOTE: An IO service or a logical server intended to be DR protected using Matrix recovery
management must contain its disks and VM files in a single datastore (multiple datastores are not
supported).
Process Resource Manager
Limitations
Creating and modifying configuration files with privilege elevation enabled is not supported
If privilege elevation is enabled in Systems Insight Manager, you can monitor Process Resource
Manager (PRM), but you may experience problems performing PRM operations. Specifically,
creating and modifying PRM configuration files may report success even though the operations
hang.
Suggested action
Do not change PRM configuration files using the PRM user interface when privilege elevation is
enabled.
HP Storage Provisioning Manager
Storage Provisioning Manager runs on an x86/x64 Windows CMS.
Limitations
Brocade Network Advisor software package 12.0.0 and later
BNA software package 12.0.0 and later are not supported with SPM version 2.3 at the time of
this publication.
Storage Provisioning Manager (SPM) upgrade process must complete before rebooting the CMS
or applying hotfixes
When upgrading from Matrix Operating Environment 6.x to 7.x and SPM is being used, the SPM
upgrade process must complete without interruption. The SPM upgrade can take several hours.
Make sure you allocate at least 8 hours for SPM to upgrade before starting the upgrade process.
CMS reboots must not be performed and hotfixes must not be applied until the SPM upgrade
process is completed. To verify that the SPM upgrade process has completed, check the
UpgradeReport.txt file in the SPM state folder (such as C:\Program Files\HP\Storage
Provisioning Manager) and make sure that the following appears at the end of the file:
================================================================================
[Current Date:Current Time][I] Upgrade completed with 0 errors and 0
warnings.
================================================================================
SPM limitations on EMC Symmetrix VMAX arrays
For more information about configuring the SPM adapter for EMC Symmetrix VMAX, see the Insight
Management 7.2 Update 1 Release Notes at http://www.hp.com/go/matrixoe/docs. For more
Process Resource Manager 43