HP Matrix Operating Environment 7.3 Release Notes

Suggested action
Before executing archive databasedelete, consult with your database administrator. If you
have already executed the command, ask the administrator about performing a shrink operation
on the transaction log.
Insight managed system setup wizard
Limitations
Privilege elevation configuration that requires a password by the privilege elevation tool is not
supported
Insight managed system setup wizard supports privilege elevation only on a CMS that has privilege
elevation configured so that no password is required by the privilege elevation tool (such as su
and sudo). If you attempt to configure features when privilege elevation is turned on and requires
a password, you may see failures in the wizard's execution output.
Suggested action
If a feature fails to configure correctly because of privilege elevation password requirements,
configure the feature outside of the managed system setup wizard.
To turn off the requirement for a password, use the Systems Insight Manager
Options→Security→Privilege Elevation menu, and uncheck the check box labeled “A password
is required for this privilege elevation tool.” Note that systems managed by the CMS must be
reconfigured to reflect this configuration change.
HP Integrated Lights-Out 3 (iLO3) support
HP Integrated Lights-Out 3 (iLO3) is supported in the current release of Insight managed system
setup wizard. However, iLO3 for ProLiant requires firmware version 1.05 or higher.
Suggested action
Update iLO3 ProLiant firmware to version 1.05 or higher.
HP Integrity rx2620 is not supported
Using the Insight managed system setup wizard to configure an HP Integrity rx2620 server is not
supported.
Suggested action
Manually configure HP Integrity rx2620 servers.
Instant Capacity Manager
Limitations
Commands executed under privilege elevation may cause Instant Capacity Manager to monitor
but not control managed nodes
Some HP-UX security settings cause output to be generated every time a user is logged in. This can
occur, for example when sudo is used in Systems Insight Manager privilege elevation mode to
execute commands on HP-UX managed nodes, which can generate apparently extraneous output
to stderr. This output may be interpreted by some Instant Capacity (iCAP) Manager functions
executed under privilege elevation as error output from those commands.
When this apparent error output occurs, the affected iCAP Manager functions fail. In this scenario,
iCAP Manager can be used only to monitor, and not control, managed nodes configured in this
way.
32 Issues and suggested actions