HP Matrix Operating Environment 7.0 Integrity CMS Installation and Configuration Guide (7.0 and 7.1)

SNMP Credentials
Configure the SNMP community name that is appropriate for your organization, or use
the default value provided.
Click Next to continue.
e. Configure Managed Systems
Configure managed systems as they are discovered, by configuring WBEM and WMI,
SNMP, SSH access, and trust relationship.
f. WMI Mapper Proxy
To retrieve managed system information on Windows systems, enter the mapper proxy
system host name and port number. The user name and password credentials must be
entered on the First Time Wizard Configure Managed Systems page.
This page does not appear if you are not managing Windows systems.
g. Privilege Elevation
Privilege elevation allows you to specify a non-root login on managed systems and a
command that can be used to acquire root privileges as needed. See also “Privilege
elevation” (page 16) and the Systems Insight Manager help.
h. E-mail
If you do not want email notification of Systems Insight Manager events from the CMS,
skip this step. Otherwise, specify the SMTP host and authentication (if required) to be
used for email notifications. On an HP-UX CMS, you can usually use the CMS as the
SMTP host. Also provide an email address to be used as the “From” portion of the email
header. HP recommends the name hpsim@hostname. Click Next to continue.
i. Summary
Displays all First Time Wizard settings with the option to modify settings or to finish the
First Time Wizard.
4. Run the Systems Insight Manager discovery process so that you can select managed nodes
for the Insight Management agent software installation in the next section. Do this even if you
configured automatically scheduled discovery in the First Time Wizard. Select
Options→Discovery... from the Systems Insight Manager menu bar, then click Run Now.
Install Insight Management agent software and configure managed systems
Managed systems require some setup before Insight Management can properly identify them,
retrieve data from them, and perform management operations on them. Managed system setup
includes the installation of agent software or configuration of agentless data collection, installation
of licenses, and configuration of options specific to the management capabilities intended for use
on the system. All of these steps are performed by the Insight managed system setup wizard.
In some cases, you may prefer to manually install agents or other required software, such as WBEM
or SSH, instead of allowing the managed system setup wizard to install the latest version (the
wizard will only update existing versions if the existing version is not supported by Insight
Management). For information about manual installation of agent software, see “Alternate procedure
for manual installation of agent software” (page 16).
IMPORTANT: If you are upgrading an existing version of the gWLM agent, you must upgrade
the gWLM agent on all systems in an SRD at the same time. You cannot run different versions of
the gWLM agent within a single SRD.
Install Insight Management agent software and configure managed systems 15