HP Integrity Virtual Server Manager 6.1 User Guide
Table Of Contents
- HP Integrity Virtual Server Manager 6.1 User Guide
- Contents
- 1 Introduction
- 2 Installing Integrity Virtual Server Manager
- 3 Accessing and Navigating Integrity Virtual Server Manager
- 4 Using Integrity Virtual Server Manager views and tabs
- 5 Using Integrity Virtual Server Manager menus
- 6 Working with VMs or vPars
- Working with VMs
- Planning VMs
- Creating VMs
- Modifying VMs
- Starting VMs
- Stopping VMs
- Restarting VMs
- Deleting VMs
- Migrating VMs
- Suspending VMs
- Resuming VMs
- Moving suspend files
- Creating virtual switches
- Starting, stopping, and deleting virtual switches
- Deleting network or storage devices
- Opening iLO console
- Opening virtual iLO remote console
- Deleting virtual iLO remote console
- Deleting DIOs
- Adding DIOs
- Replacing DIO H/W path
- Replacing DIO MAC address
- Working with vPars
- Creating vPars
- Modifying vPars
- Booting vPars
- Stopping vPars
- Resetting vPars
- Creating virtual switches
- Starting, stopping, and deleting virtual switches
- Deleting network or storage devices
- Deleting vPars
- Opening iLO console
- Opening virtual iLO remote console
- Deleting virtual iLO remote console
- Adding DIOs
- Replacing DIO H/W path
- Replacing DIO MAC address
- Deleting DIOs
- Working with VMs
- 7 Collecting and viewing utilization data
- 8 Viewing logs and version information
- 9 Support and other resources
- A Error messages, status indicators, and troubleshooting
- Glossary
- Index
NOTE: The Capacity Advisor Data item is displayed only when you use Integrity Virtual Server
Manager with Matrix Operating Environment for HP-UX; it is not displayed when using Integrity
Virtual Server Manager through HP SMH. The accessibility of the other menu items depends on
the current view and selections. For example, to access the VM or vPar log from the VSP Virtual
Servers tab, a VM or vPar must be selected, as shown in Figure 57.
Figure 57 Integrity Virtual Server Manager View menu
Table 13 describes the View menu options. More detailed information is provided by the Integrity
Virtual Server Manager help.
Table 13 Integrity Virtual Server Manager View menu options
Action SummaryMenu Selection
Displays the VM or vPar Properties General tab. For more
information about this view, see “VM or vPar Properties
view” (page 60).
View→Virtual Server Properties...
Displays the Vswitch Properties General tab. For more
information about this view, see “Virtual Switch (Vswitch)
Properties view” (page 69).
View→Virtual Switch Properties...
Displays the version numbers of Integrity Virtual Server
Manager, Integrity VM, and the providers on the VSP and
each VM or vPar. For more information, see “Viewing
Integrity Virtual Server Manager, Integrity VM, and WBEM
Provider versions” (page 124).
View→Integrity Virtual Server Manager Version
Information...
Displays the events logged by Integrity VM pertaining to
the VSP and all its guests. To use this feature with Integrity
Virtual Server Manager running under HP SMH, you must
be logged into HP SMH with either Operator or
Administrator privileges. For more information, see
“Viewing the VSP log” (page 123).
View→VSP log...
Displays the events logged by Integrity VM pertaining to
a VM or a vPar. To use this feature with Integrity Virtual
Server Manager running under HP SMH, you must be
logged into HP SMH with either Operator or Administrator
privileges. For more information, see “Viewing the VM or
vPar log” (page 124).
View→VM or vPar log...
Using the View menu 79