HP Integrity Virtual Server Manager 6.0 User Guide

Table 9 Virtual Server Manager Modify menu options (continued)
Action SummaryMenu Selection
Modifies the LAN assignments of virtual switch ports
connected to the virtual partition.
Modify→VLAN Settings...
Modifies the IP address and the Netmask of the virtual iLO
remote console of a virtual partition guest.
Modify→Add/Modify Virtual iLO Remote Console...
Adds a virtual storage device to a virtual partition, where
the virtual storage device is backed by physical storage
and connected to a virtual storage adapter on the VSP.
Modify→Add Storage Device ....
Adds a network device to a virtual partition, where the
network device is associated with a virtual switch. Allows
you to create a new virtual switch.
Modify→Add Network Device...
This option is enabled only for Virtual Machines.Modify→CPU Entitlement for VM...
This option is enabled only for Virtual Machines.Modify→Hardware Auto Start for VM...
Sets and changes WBEM credentials for virtual partitions.
For information, see “Setting WBEM credentials in HP
SMH” (page 13). This menu option is available only when
using Virtual Server Manager with HP SMH.
Modify→WBEM Credentials...
Using the Delete menu
The Delete menu allows you to delete one or more virtual partitions, virtual switches, or virtual
partition I/O devices. Figure 46 shows the choices that might be available when you select the
Delete menu. The choices are enabled according to the view and tab. In Figure 46, the Virtual
Partition... option is enabled and the Virtual Switch... and I/O Device... options are disabled. The
Virtual Partition... option is enabled at the VM Properties view or any VSP or Vswitch Properties
tab where you have selected one or more virtual partitions (such as the VSP Virtual Partitions tab,
as shown in Figure 46). The Virtual Switch... option is enabled at the Vswitch Properties view or
any VSP or VM Properties tab where one or more virtual switches are selected. The I/O Device...
option is enabled at any Network or Storage tab where one or more I/O devices are selected.
From tabs that list and allow selection of multiple virtual partitions, virtual switches, or I/O devices,
you can simultaneously delete all selected objects.
72 Using Virtual Server Manager menus